Enhanced Faces/Overlaid/Coated
Plywood and oriented strand board panels are available with many types of face enhancements. Two common face coverings are a Medium Density Overlay (MDO) or High Density Overlay (HDO), which are resin-impregnated fiber surfaces bonded to one or both panel faces under heat and pressure. Other types of enhanced surfaces include fiberglass-reinforced plastic, polyethylene (HDPE), hardboard, metal and other materials for exceptionally smooth or special-use surfaces. Reference HDO/MDO Plywood, Form B360, for more information.
Panels with A-grade, B-grade and C-Plugged-grade veneer faces are usually used in panels with enhanced faces to ensure a smooth solid face to finish or receive the overlay. It should be noted that when presented with moisture in the form of humidity, vapor or liquid, the grain of the wood may raise and the surface area could become uneven and transfer through thin overlay materials.
For a full description of veneer grades, consult Panel Design Specificaiton, Form D510.
Bond Durability Classification. For many industrial-type applications, including product and system components, truck trailer liners, crates and pallet decks, Exposure 1 panels are suitable. For uses not permanently exposed to elevated moisture exposure, especially export packaging and refrigeration applications, Exterior panels are recommended for repeated wetting and redrying or long-term exposure to weather or other conditions of similar severity. For more information on the difference in bond durability classificaiton, visit the Durability page.
Span Ratings. The Span Ratings in the trademarks on APA Rated Sturd-I-Floor appear as a single number. APA Rated Sturd-I-Floor panels have a puncture resistant face. The Span Ratings of 16, 20, 24, 32 and 48 oc are assigned to APA Rated Sturd-I-Floor. The larger the Span Rating number, the stronger the panel regardless of thickness. Sanded panels other than Rated Sturd-I-Floor panels do not have Span Ratings.
Panel Orientation. The strength axis, usually the grain direction of the wood veneers or strands (unless the strength axis is otherwise identified), should run across the stringers for greatest strength and stiffness.
When ordering APA panels, use the following formats:
Enhanced faced Panels: Designate thickness, APA trademark, face enhancement or grade, bond durability classification, additional information (such as Structural I, HDO or MDO) and dimensions and number of pieces. For example:
3/8" APA, Medium Density Overlay, Exterior
48"x96", 100 pcs.
Other considerations:
Structural I Panels. These panels are especially designed for engineered applications such as structural components where design properties including tension, compression, shear, cross-panel flexural properties and nail holding and bearing are of significant importance. Please see section 5.6.5 Structural Panels in U.S. Voluntary Product Standard PS 1-07 for details on veneer species and grade and bond durability requirements.
Class I and Structural I Concrete Forming Panels. B-B concrete form panels are manufactured in two classes: Class I and Structural I. Panels are sanded on both sides and treated with a release agent unless otherwise specified. Class I panels will have faces of Group 1 species, crossbands of either Group 1 or 2, and center plies of any of Group 1 through 4. Structural I B-B Plyform panels are also sanded and have Group 1 veneers throughout. They may also be overlaid with HDO or MDO.
Edge Treatments. A common edge treatment is a tongue and groove edge that is used when engineered wood panels are placed together with their long edges adjacent to each other (one edge has a groove milled into it and the other a tongue). By joining tongue edges into grooved edges, a strong connection is created. This connection causes the adjacent panels to move up and down together when loads are applied near the edge.
Also, different edge treatments are available for panels through a secondary manufacturing process. Research proves that a square edge on a panel deck performs as well as a bull-nosed edge and slightly better than a chamfered edge when edges are exposed to some types of impacts.
Print Page
E-mail Page